Via Perini N.6 | Ostra Vetere 60010 (AN)

info@hexar.it

0,00€

No products in the basket.

Shop

Home Shop

Showing 1 – 12 of 22 results

Din Rail DC Power 24V 120W

Din Rail DC Power 24V 120W
35,00

Din Rail DC Power 48V 240W

Din Rail DC Power 48V 240W
65,00

HMI STM32

Resistive touch screen operating panel, connect to our drivers, PLC, CNC via Modbus RTU 485.
85,00

IOEXP: Expansion 20 input 16 output

IOEXP is the expansion that allows you to manage 20 0-24V digital inputs and 16 0-24V digital outputs. Compatible with: LT4, DCS4, ST6, IEI, IEI-CN. Input connectors (J1 J2 J3 J4) 0-24V digital input connectors. Power supply connector (J5) Power supply connector for digital inputs and outputs. Output connectors (J6 J7) 0-24V digital output connectors.
90,00

HMI 7” RS485

Capacitive touch screen operating panel, connects to our drivers, PLC, CNC via Modbus RTU 485. Through the dedicated development environment (IDE), the operator can create pages with Menus, Buttons, Images, Sliders, Meters and other widgets.
90,00

ST1-E

Stepper driver designed by Hexar to obtain high performance but at a low cost. It is possible to move the motor with the classic Step / Direction signals; the proprietary algorithm of StepSmooth allows the smooth and silent movement of the motor even with low subdivisions of microsteps (eg 1/2) this allows to obtain high speeds even with the use of PLC with basic pulse generation functions. The driver features advanced anti-resonance and vector current management algorithms for higher performance and less heating. Through the free AxDev software, which is connected to the driver with a standard USB-B cable, it is possible to set all the driver parameters and perform engine operation tests via start / stop commands, etc. directly on the screen. The possibility of using an encoder feedback allows to further increase the precision and speed of the movement. Furthermore, the current necessary for operation and the consequent heating decrease considerably, as the driver is able to automatically manage the current intensity in the phases based on the instantaneous torque required. With the use of the encoder, the zeroing of the axis position can be done only once when the machine is switched on, as the real position of the axis is always stored even in case of disabling the motor. It is equipped with a USB connection to the PC for configuration and testing. Available in the basic version with power supply up to 75V, or in the version with power supply from 110 / 230V mains.
130,00

Driver stepper ST1 (anello aperto)

Stepper driver designed by Hexar to obtain high performance but at a low cost. It is possible to move the motor with the classic Step / Direction signals; the proprietary algorithm of StepSmooth allows the smooth and silent movement of the motor even with low subdivisions of microsteps (eg 1/2) this allows to obtain high speeds even with the use of PLC with basic pulse generation functions. The driver features advanced anti-resonance and vector current management algorithms for higher performance and less heating. Through the free AxDev software, which is connected to the driver with a standard USB-B cable, it is possible to set all the driver parameters and perform engine operation tests via start / stop commands, etc. directly on the screen. It is equipped with a USB connection to the PC for configuration and testing. Available in the basic version with power supply up to 75V, or in the version with power supply from 110 / 230V mains.
148,00

H30036

Stepper motor with encoder 2.,7Nm , 1000 p/rev
105,00

H30014

Stepper motor with encoder Nema 34 ,7Nm , 1000 p/rev
115,00

H30003

Stepper motor with encoder Nema 34 , 8Nm , 1000 p/rev
120,00

H30019

Stepper motor with encoder Nema 34 , 12.5Nm , 1000 p/rev
142,00

Driver Stepper LT4

High performance Stepper driver, current vector control, closed loop encoder, PLC on board programmable in “C”, suitable for multi-axis systems with the X-Bus drive link.
175,00
Hexar