Stepper driver designed by Hexar to obtain high performance but at a low cost. It is possible to move the motor with the classic Step / Direction signals; the proprietary algorithm of StepSmooth allows the smooth and silent movement of the motor even with low subdivisions of microsteps (eg 1/2) this allows to obtain high speeds even with the use of PLC with basic pulse generation functions.
The driver features advanced anti-resonance and vector current management algorithms for higher performance and less heating. Through the free AxDev software, which is connected to the driver with a standard USB-B cable, it is possible to set all the driver parameters and perform engine operation tests via start / stop commands, etc. directly on the screen.
The possibility of using an encoder feedback allows to further increase the precision and speed of the movement. Furthermore, the current necessary for operation and the consequent heating decrease considerably, as the driver is able to automatically manage the current intensity in the phases based on the instantaneous torque required. With the use of the encoder, the zeroing of the axis position can be done only once when the machine is switched on, as the real position of the axis is always stored even in case of disabling the motor.
It is equipped with a USB connection to the PC for configuration and testing. Available in the basic version with power supply up to 75V, or in the version with power supply from 110 / 230V mains.
Stepper driver designed by Hexar to obtain high performance but at a low cost. It is possible to move the motor with the classic Step / Direction signals; the proprietary algorithm of StepSmooth allows the smooth and silent movement of the motor even with low subdivisions of microsteps (eg 1/2) this allows to obtain high speeds even with the use of PLC with basic pulse generation functions.
The driver features advanced anti-resonance and vector current management algorithms for higher performance and less heating. Through the free AxDev software, which is connected to the driver with a standard USB-B cable, it is possible to set all the driver parameters and perform engine operation tests via start / stop commands, etc. directly on the screen.
It is equipped with a USB connection to the PC for configuration and testing. Available in the basic version with power supply up to 75V, or in the version with power supply from 110 / 230V mains.
High performance Stepper driver, current vector control, closed loop encoder, PLC on board programmable in “C”, suitable for multi-axis systems with the X-Bus drive link.
High performance Stepper driver, current vector control, closed loop encoder, SSI or BISS-C absolute encoder, PLC on board programmable in “C”, suitable for multi-axis systems with the X-Bus drive link.
